Product Description
Read all instructions before using.(Please refer to the instruction manual)
Thank you for your purchase!
In order to have trouble-free performance
please read all instructions before operating.
is not responsible for the accident causing by not following the instructions
Design and specification of the product can be subject to be changed for improving the quaity.
Informing the product, model, faulty status, and the customer (tel t or email etc), the kind consulting and quick service will be provided.
Handpiece -1 year
Control box & Foot Pedal-1 year
Warranty does not include misuse or nomal wear of bearing, carbon brush, collet chuck, spindle and armature.
SERVICE FOR CHARGE
In case of the fault or malfunction from the misuse of the user
-Using with wrong Input Voltage (AC Voltage)
-Dropping down during setting or moving
-In case of user's misuse or improper use
-Using consumable parts or accessories not recommended by manufacturer
Other cases
-Faulty by Act of God (fire, sea wind or water, flood etc).
Replacing by the normal wear of the consumable parts
(ball bearings, collet chuck, carbon brush, spindle, or armatue etc.)
SETING AND OPERATION
1- After checking off-switch in control box, plug in.
2- Connect handpiece to output of control box
3- Set the speed dial of control box to "o".
[caution!]
in case of easy chuck change type or front-chuck-open type (Forte, 103L, 107 and 102WLHP),please use it after checking the bur is completely lock. This is because the chuck could be loose after chuck or bur change
5- Hold handpiece with one hand and with the other hand, turn on the power of control box.
6- Check handpiece running normally controlling speed dial in control box
7- Tum off the power and connect the foot pedal to control box. Check speed operating of the pedal
8- Turn off the power and switch to reverse direction. Turn on the power and check the operating.
Please tun off the switch when you do not use the unit.
1 .Do not work in a dangerous place. Do not use the control box in a humid place.ac
2 .Transport and storage conditions:
Temperature: 10-40ºC
Humidity: 30-75% RH
Atmospheric Pressure
:700 hPa to 1060 hPa
3. Our handpiece & foot pedal should be only used for our confrol unit
4.Bur
*Dimensions of the bur. 2.35mm (SO7785-2 TYPE2)
*Minimum iting length of bur of bur :10mm
*When locked in the chuck, the maximum projection length of should be less than 35mm Use a bur that conform to the ISO standards
Avoid using a rusty or bent bur that may cause excessive wear of bearings.
Keep safe speed, and precautions recommended by bur manufacturer
5.Check for any troubles, inctuding vibration of bur,at low speed, and then start high speed
6.Operate the speed control dial in control box softly
7.use a fuse of 220V/230V/2A for control box(or110V)
8.Turn off the power in order to change the bur.
9.Be coreful not to drop the handpiece as it may be damaged or broken.
in case that it is drooped, check if the bur is bent or if any excessive heat is generated while carefully operating it
10.if ary problem occurs in handpiece, use after repaining..
11.Do not tumon the power of control box while the collet chuck of handpiece open (Short circuit of the motor may be coused)
12 .Make sure that the switch is off before putting the power plug in the socket, in order to avoid on unexpected injury due to sudden start
13.A circuit breaker is provided to protect the motor. it is actuated when there on overload which the motor cannot stand. Work within a range of load which it is not actuated
14.Do not open the chuck while operating
15.keep the handpiece with setting a bur to the collet chuck affer opperation
16.Do not put the handpiece down befare it stops completely
17.Besre to pul out the power cord before moving the control box
18.use the specified voltage
19.use accessories suitable for this product
20.For recommended speed in various applications, follow the manufacture's instructions
21.Wear proper profecive cothes and equipment ;including a dust mask and safety goggles. Use a proper suction unit and a ventilator.
22.keep the workplace clean. Debris may cause on accident
Package Included:
1 x control box
1 x 102L Handpiece
1 x Silicon Stand
1x Foot Controller
Detailed Photos
Company Profile
Foshan Asin Dental Equipment Co. Liminited, established in 2018, located in Foshan .we are a professional Dental supplier specializes in dental equipment research & development, manufacture and marketing.
Most of our products produced by our cooperative factory are with CE ISO approval, some of them got FDA certificate.
Our main products includes Dental high & low speed handpiece ,Dental endodontic treatment,Air Prophy ,Micro motor, Portable x-ray unit, Dental lamps, dental loupes & headlight and other dental accessories &material.
Our production and sales team are committed to the dental industry for more than 15 years. "Professional service ,good quality product ,reasonable price " is what you will know about our company. We can provide our dental product for your dental clinic ,dental laboratory ,office and school ect. with reliable quality control and service . OEM and ODM orders are acceptable, products customized for your request. Our company and cooperative production line have been verified by SFDA. Our dental products are well accepted not only in Asia, but also have good sales in European countries, Middle East , South America. Reliable quality,fast delivery and attentive service , We have provided our professional services to dental distributors and dentists in more than 85 countries. Cooperate with our company, our sales manager will be your professional Sales Consultant. we offer comprehensive sales solutions and product marketing suggestion.
We are sincerely looking forward to cooperating with companies from all over the world!
Certifications
Packaging & Shipping
Payment methods & Shipping
FAQ
Q1. Are you a trading company or factory?
A1: Yes,we are a dental equipment manufacturer in Foshan,China.
Q2. What 's your advantage?
A2: Our factory specializes in this field about 15 years, focus on dental equipment and dental spare parts manufacture. Providing good after-sale service and competitive price. Our factory will launch new products every 3-6 months to help you better develop your local market. For the same regular product,same quality, we have better price.
Q3. How do I order from you?
A3. You can please send us an inquiry ,We will make quotation after you send us your purchase plan (including product name, model and quantity). If you agree with the quotation, please send us your company name, address and telephone for goods delivery. We will make proforma invoice and inform you the payment way. Goods delivery details will also be informed accordingly.
Q4. How long is your delivery time and how long i can get the order ?
A4. Generally it is 7-15 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to
quantity.
We offer varies of shipping way , express : DHL FEDEX UPS TNT ARAMEX EMS regular shipping : post air mail ect.
different shipping way will need different shipping time to reach you . usually it will take 7-30 days by express , and 30-60 days via regular post air mail .
Q5: Can you make customer's logo for the products?
A5: Yes sure we can make any legal logo for you.
Q6. What is your terms of payment?
A6.Online paying / T/T bank transfer /western union / paypal accepted. You have any problems of payment you can also contact us , we offer various payment ways .
Our Advantages
Audited Supplier 
){kind=link}